You don’t lose cloud environments in big movie hacks; you lose them through tiny trust leaks. Think a token without the right guardrails, a role anyone can assume, or an unchecked IdP group.
Here’s the fix: AWS STS now validates IdP claims before issuing temporary credentials. If the token’s claims, like groups, roles, audience, or subject, miss policy, the door stays shut.
No more assume first and then sort it out later. This tightens zero trust and blocks lateral movement before it starts. It’s like checking guests at the door against the real list first.
If you use Okta, Azure AD (Entra ID), Amazon Cognito, or GitHub OIDC, make this your default. You verify who’s asking, what they claim, and if those claims match expectations. Do it in the role trust policy and with session tags. It’s clean, fast, and ruthlessly consistent every single time.
If you only read this, you can finally make identity checks deterministic. Your IdP states who the caller is, with proof inside the token. Your trust policy checks exactly what you care about, like audience, subject, groups, and app. STS either issues creds or it doesn’t, with no gray zone or later band-aids.
And because this happens before a session exists, cleanup time drops hard. A bad token dies at the door and never gets a session. A misconfigured app can’t accidentally slide in and cause trouble. That’s a huge win for least privilege and incident response sanity.
When STS evaluates AssumeRoleWithWebIdentity or AssumeRoleWithSAML, it can demand claim matches first. Practically, you put the checks in the role’s trust policy for OIDC or SAML. You can also pass session tags from IdP attributes, then gate access with ABAC using aws:PrincipalTag. If the token’s aud, sub, or mapped attributes don’t align, the AssumeRole call fails.
First-hand example: You map your Okta group cloud-admins into the token’s groups claim. Then you write a trust policy that only allows AssumeRole when groups includes cloud-admins. Folks outside that group never even get a session, which is perfect.
This is identity-first authorization, simple and direct. For OIDC, your trust policy references claim keys namespaced by the OIDC provider you registered. For example, idp.example.com:aud or idp.example.com:sub in the policy conditions. For SAML, AWS exposes attributes so you can apply the same claims-must-match pattern. No session, no access, no problem, and logs explain why.
Zero trust says never trust, always verify, even inside your walls. With STS claims validation, the verification happens right at the blast door. This isn’t post-hoc authorization or logs you’ll read tomorrow or later. It’s a hard deny at call time that shrinks attack paths fast.
Real-world vibe: same dev machine and same VPN, but different Okta group. One button works, the other doesn’t, because the claim didn’t match. That’s zero trust doing reps, every hour, every day.
Another way to see it: an attacker steals a web token, but cannot satisfy aud or sub. Your trust policy requires those exact values to match or the call dies. They can’t even start a session, so a whole class of incidents vanishes. Bonus: CloudTrail shows who tried what, which claims, and the deny reason.
Before claims can be validated, your AWS OIDC provider configuration must be exact. Point AWS to the IdP’s issuer and keys using the discovery document at:
Pro move: Confirm the iss in real tokens exactly matches the issuer you register. The ARN format for an IAM OIDC provider is: arn:aws:iam:::oidc-provider/.
A frequent mix-up is pasting the discovery URL as the provider URL in IAM.
Do not include protocol paths or the well-known path in the provider URL.
The provider URL must equal the token’s iss claim, including any fixed path.
If you see the identity provider url cannot be same as openid connect oidc issuer url, check issuer alignment.
aws iam create-open-id-connect-provider --url https://idp.example.com --client-id-list sts.amazonaws.com --thumbprint-list <SHA1_THUMBPRINT>
First-hand example: With Azure AD (Entra ID), the issuer often includes a tenant path. If your iss is https://login.microsoftonline.com//v2.0, that is what you register. Do not add the /.well-known suffix anywhere inside the provider URL.
In the role trust policy, key off claims like aud and sub. For OIDC, use the provider namespace keys you registered in IAM for checks. For example: idp.example.com:aud == sts.amazonaws.com and idp.example.com:sub == app:backend:ci-runner. For Kubernetes IRSA, sub often looks like system:serviceaccount:namespace:serviceaccount value.
Need group-based gates from Okta or Cognito for access controls? You can map groups into a custom OIDC claim and check it in the policy. Or pass groups as session tags and enforce aws:PrincipalTag/Group in resource policies.
First-hand example: Require claim idp.example.com:groups to contain billing-ops for finance roles. Anyone outside that group gets a hard deny on AssumeRoleWithWebIdentity requests immediately.
Use aud=sts.amazonaws.com and iss=https://token.actions.githubusercontent.com for the provider. Then restrict sub to repo:ORG/REPO:ref:refs/heads/main or your release tag pattern. That only lets your intended workflow on your intended branch assume the role.
When federating with AssumeRoleWithWebIdentity or AssumeRoleWithSAML, pass chosen IdP attributes as tags. Then write resource policies that only allow actions when aws:PrincipalTag values match. This is ABAC, and you avoid provisioning lots of similar IAM roles.
Claims validation filters who even gets a session in the first place. ABAC then decides what that session can do across resources later. It’s two gates: first the front door, then the hallway, nicely layered.
First-hand example: One analytics-engineer role covers many teams across regions. ABAC policies limit Glue, Athena, and S3 prefixes by team=analytics-east or analytics-west. You scale access with tags instead of a huge sprawl of roles.
First-hand example: A team assumed the role locally, but the CI pipeline failed. Reason was the CI IdP app used a different audience than the local setup. Matching idp.example.com:aud to sts.amazonaws.com surfaced the misconfig right away.
You’ve basically moved identity checks to the exact right layer here. They run at the moment of assumption, before anything dangerous can happen. That shrinks attack paths, makes access predictable, and pleases your auditors. They get neat, timestamped receipts for every accept and deny event.
Traditional trust policies could rely on broad principals and simple conditions that were vague. With claims validation for OIDC or SAML, you match token attributes directly. If claims don’t match, STS denies the session up front, every single time.
Not necessarily, and that’s the good news for your team. Use ABAC, pass groups or team attributes as session tags from the IdP. Then enforce access in resource policies with aws:PrincipalTag for least privilege.
It must exactly match the token’s iss claim without the well-known path. For example, if iss is https://idp.example.com, register that as the URL. For Azure AD, the issuer can include a tenant path, so match it precisely.
Your IdP likely isn’t minting aud=sts.amazonaws.com or the expected audience claim. In OIDC, aud identifies the intended recipient for tokens without confusion. Update the IdP app configuration so the audience matches your trust policy.
If the group appears as an OIDC claim, enforce it in the trust policy. That gives a hard front-door check that denies early and clearly. If easier, pass groups as session tags and enforce them with ABAC. Many teams do both for defense in depth across the stack.
Yes, Amazon Cognito can issue OIDC tokens that AWS will accept. Ensure the issuer, JWKS, and audiences are correct and consistent values. Then reference claims in your trust policy and pass custom attributes as tags.
Capture a real token from your IdP app securely, then decode it. Review iss, aud, sub, and custom claims to see the real values. Call sts:AssumeRoleWithWebIdentity using that token with the AWS CLI. Use CloudTrail to confirm the deny reason and tune the trust policy.
Tokens must be valid at call time or else STS will deny fast. If tokens expire too quickly, refresh them or shorten the job length. Your role’s maxSessionDuration is an upper bound for STS credentials. Don’t request longer than allowed because it will not be granted.
Yes, you can bind roles to specific repos, branches, or environments now. Use sub and aud to lock roles to exact workflows that you approve. A rogue fork won’t match your subject pattern, so it cannot assume.
One more pragmatic tip: roll this out in slices to reduce risk. Start with CI roles since they are most predictable and easier to reason. Then service workloads like Kubernetes service accounts with clear subjects. Finally, move to human access and document expected claims next to code. You’re building muscle memory so future changes feel smooth and safe.
Here’s the kicker: STS claims validation makes zero trust actually practical. When trust policies and ABAC align with real IdP claims, access turns deterministic. No surprise entitlements, no mystery escalations, and no worked in staging ghosts. Make identity a crisp contract that’s codified, enforced, and fully logged. Start by locking down aud and sub in every trust policy you own. Then add groups or roles and session tags, and watch blast radius shrink.
Zero trust isn’t no trust. It’s prove it, every time.